Products
Ten models across six families. Each page carries the full test table — standard, typical value and method — plus the packaging options that model ships in.
Choose a family before comparing models
Ten models are not ten interchangeable answers to the same job. Choose the family by load and substrate first, then compare the model inside that family by modulus, skin time and bead geometry.
| Family | Primary job | Do not use for | What decides the choice |
|---|---|---|---|
| Automotive glass | Bonded glass and retention | Sealing body panels or construction joints | Adhesion, modulus and elongation |
| Body and sheet metal | Seams, panels and containers | Structural glass | Hardness, sanding and paint |
| Construction joints | Concrete, tunnels and drainage | Active cracks without a joint design | Movement and water |
| Industrial and STP | Metal, plastic and glass | Structural or crash load | UV, paintability and adhesion |
| Wood and glulam | Glulam and engineered timber | Wet timber without moisture control | Solids and press time |
| Activators and primers | Surface preparation | Replacing the adhesive | Cleaning, activation and drying |
The right family matches the dominant load, not the highest tensile number. If two models in a family look equivalent, compare skin time, elongation and pack format before ordering a sample. The batch certificate and a coupon test on the real substrate still decide.
Automotive glass bonding
Windscreen, side and rear glass adhesives — 310 ml cartridges, sausages and 200 L barrels.
KA518
Polyurethane Windshield Adhesive
General-purpose moisture-curing adhesive for bonded windscreens, 310 ml cartridges.
KA520
High-Strength Windscreen Adhesive
Higher-modulus grade for bus and coach glazing.
KA530F
Fast-Drying Glass Adhesive
Two-hour positioning at 23 °C with a 6.5 MPa cured tensile strength.
Body and sheet metal
Seam sealers for body panels, doors and container joints — sandable, paintable, four colours.
Construction joints
Concrete, tunnel and drainage sealants — 550–615% elongation, elastic recovery up to 80%.
Industrial and STP
Silyl-terminated polymer sealant for metal, plastic and glass — primerless and paintable.
Wood and glulam
One-component PUR for engineered timber, glulam beams and sandwich panels.
Activators and primers
Surface preparation that decides whether the bead holds: K-901 activator, K-801 primer.